Home/Display/Bulletin Board Solutions/7 Series Site-fabricated System/Classic Line 1/2"/Frame Kits/Beveled Front Load Kits
Classic-Line® 1/2 in. Window and Door Corner Kit with Seam – D, Beveled Front-Load
1/2 in. Fabric Corner Kit – D, Beveled Front Load
- For use with Fabricmate Classic-Line® Wall Upholstery System
- Used where the seam line for 2 adjacent panels are inline with a window or door edge
- Pre-cut & ready-to-assemble
- 1 set per pack/includes 2 corners
- Save money – buy the Contractor Pack which includes 10 kits, 1 Hold-It Stick™, and 2 Blend-It™ and Square-It™ tools
- Classic-Line® ½ in. Beveled Front-Load Fabric Mounting Frame sold separately
Save time with Easy-to-Install precut kits. Our Window and Door Corner Kits with Seams are ready to assemble as part of the Fabric Wall Upholstery System by Fabricmate.
Used with other kit components, the Classic-Line® ½ in. Window and Door Corner Kit with Seam – D, Beveled Front Load will save time and eliminate any guesswork when building your own custom fabric covered wall panels.
This corner kit is used where the seam line for 2 adjacent panels are inline with a window or door edge. Instructions and templates included.
Bedroom with vertical panel layout and custom fabric
Office wall with two-band layout and vertical column using various fabrics.
Conference Room walls with a curved waterfall layout (right) and a three-band layout (left).
Conference Room walls with a graphic panel (right) and a three-band layout (left).
Commercial hallway with a floor-to-ceiling full-wall graphic mural installation.
School multi-purpose room with horizontal and vertical single-band installations using Open House Eucalyptus Fabric.
Classic-Line® Beveled Front-Load D Kit Layouts
Close-Up of D Kit at door. Straight Frame (F) Pieces are faded for clarity.
Close-Up of D Kit with fabric installed.
Quality and Functionality Learn More
This fabric - and the many others like it we carry - is perfect for use with our Fabric Wall Finishing System. Combined with our Fabric Mounting Frame and ReCore Backing, this fabric can be used to create anything from a full-wall covering to a group of panels that will improve acoustics, protect your walls and provide you with a tackable surface to pin documents, posters or reminders.
A Simple System
The Track frames the Panel and holds the backing in place and the Fabric taut over the surface
The Backing can be any substrate. Our ReCore provides acoustical control, high-impact durability & tackability
The Fabric is rolled into the Track's hidden channel and held over the panel surface to mitigate visible damage